How to know the Size or Volume of a Refrigerator?

To know the Size/Volume of the refrigerator, use below steps:

“Update: ZeroWaste is now InstaCash”

1. Volume is mentioned on the Sticker on Front Side of the refrigerator.
2. Volume is mentioned on the Serial Number Label on Front Side or Back Side of the refrigerator. (Enclosed in Red Border Rectangle.)

1. In case there is no Sticker or it has faded/removed or volume is not mentioned and there is no Serial Number Label then click How to measure volume of refrigerator?

• When using Inches/Foot for measurement:

1. Open the refrigerator door. Measure the depth of the refrigerator from the front edge of the refrigerator opening to the back wall. Make sure that you measure in feet and not in inches. Note the depth measurement on a piece of paper.
2. Measure the height and the width of your refrigerator’s opening. Note the two additional measurements on your paper. Multiply the depth, height and width measurements to obtain the refrigerator’s cubic foot measurement.
3. Take the same measurements from the interior of the freezer. Multiply those measurements together to get the cubic foot size of your freezer.
4. Add the cubic foot measurement of the refrigerator interior to the cubic foot measurement of the freezer interior.

This gives you the total cubic foot measurement for the refrigerator.

Now, 1 cubic foot = 28.3 litres.

To get volume in liters, multiply volume in cubic foot by 28.3 It will give you the volume of refrigerator in liters or click <
http://www.metric-conversions.org/volume/cubic-feet-to-liters.htm >.

• When measuring in centimeters,

Measure inside the Refrigerator.

Example

H (height) = 100 cm = 10 dm.

D(deep) = 50 cm = 5 dm.

W(wide) = 50 cm = 5 dm.

Volume = 10x5x5x1000mm3 = 250000mm3

Divide this volume by 1000 to get volume in liters

250000/1000 = 250 liters

Note: This post was originally published in August 2015 and has been completely revamped and updated for accuracy and comprehensiveness.